Jasco in-wall dimmable switch
--------------------------------
GE Z-Wave Wireless Smart Lighting Control Smart Dimmer Switch, In-Wall, Includes White & Light Almond Paddles, Works with Amazon Alexa, 12724
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


	.. image:: ../../images/dimmable_inwall_switch/jasco_inwall_dimmer_12724.jpg
	.. :align: left
	
Feature and benefits
~~~~~~~~~~~~~~~~~
	- New aesthetically pleasing design with rocker switch and slender dimmer control slide bar
	- Integrated linear full-range slide control for easy, precise operation
	- Controls a variety of dimmable LED and CFL lamps
	- Compatible with Incandescent and Halogen lamps
	- Single pole or 3-way operation (when using 3-way switch); packaged with White, Ivory, and Light Almond color change kits
	- Additional color change kits available in Black, Brown, Red and Gray
	- Slim, compact housing fits easily into a standard wallbox and is suitable for multi-gang installations with other Decora products
	- The slide bar location preserves the selected brightness level when the dimmer is switched OFF
	- Microprocessor control offers flexibility to program LEDs and CFLs for best performance
	- Switch under the color change kit to turn locator light ON/OFF
	- No fins for multi-gang installation
	- Screw terminals with back wire capability for easier installation, a Neutral wire is not required for operation
	- Built-in radio/TV interference filter

Specification
~~~~~~~~~~~~~~~~~~~~~~
	- Power: 120 VAC, 60 Hz.
	- Incandescent: 600W
	- LED and CFL: 300W (2.5A)
	- Single pole and 3-way
	- Operating Temperature Range: 0°C to 55°C
	- Storage Temperature Range: -10°C to 85°C
	- Relative Humidity: 20% to 90% non-condensing

Inclusion/Exclusion to/from a network
~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller to Inclusion/Exclusion mode
	#. Push top or bottom paddle once to reset. Device will be included/excluded to/from zwave network.
	
Link in Amazon
~~~~~~~~~~~~~~~~~
	https://www.amazon.com/Previous-Model-Wireless-Lighting-Wall/dp/B006LQFHN2/ref=sr_1_1?s=hi&ie=UTF8&qid=1502434063&sr=1-1-spons&keywords=ge+12724&psc=1
	
Configuration description
~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. LED light specify
		- Parameter: 3 (0x03)
		- Size: 1 byte
		- Value:
			(1) 0 = LED on when light off
			(2) 1 = LED on when light on
			(3) 2 = LED off all the time
		- Default: 0
	
	#. Invert switch
		- Parameter: 4 (0x04)
		- Size: 1 byte
		- Value:
			(1) 0 = ON at the bottom and OFF at the top
			(2) 1 = ON at the top and OFF at the bottom
		- Default: 0
	
	#. Number of dim steps when receiving zwave command
		- Parameter: 7 (0x07)
		- Size: 1 byte
		- Value:
			1 ~ 99: number of steps
		- Default: 1
	
	#. Timming of dim steps when receiving zwave command
		- Parameter: 8 (0x08)
		- Size: 2 byte
		- Value:
			1 ~ 255: number of steps
		- Default: 3
		
	#. Number of dim steps when manual control
		- Parameter: 9 (0x09)
		- Size: 1 byte
		- Value:
			1 ~ 99: number of steps
		- Default: 1
	
	#. Timming of dim steps when manual control
		- Parameter: 10 (0x0A)
		- Size: 2 byte
		- Value:
			1 ~ 255: number of steps
		- Default: 3
		
	#. Number of dim steps when all-on/all-off command
		- Parameter: 11 (0x0B)
		- Size: 1 byte
		- Value:
			1 ~ 99: number of steps
		- Default: 1
	
	#. Timming of dim steps when all-on/all-off command
		- Parameter: 12 (0x0C)
		- Size: 2 byte
		- Value:
			1 ~ 255: number of steps
		- Default: 3