Jasco In-Wall Dimmer 45857
---------------------------------------
GE ZigBee In-Wall Smart Dimmer Switch, LED and CFL Compatible, with Energy Monitoring and HA1.2 Certification, 45857GE, Works with Amazon Alexa
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


	.. image:: ../../images/dimmable_inwall_switch/jasco_inwall_dimmer_45857.jpg.jpg
	.. :align: left

Specification
~~~~~~~~~~~~~~~~~~~~~
	- Power: 120 VAC, 60 Hz.
	- Signal (Frequency): 2.4 Ghz IEEE 802.15.4.
	- Maximum Loads: 600W, 2-gang 500W or 3-gang 400W incandescent.
	- 150W CFL/LED, 2-gang 125W CFL/LED or 3-gang 100W CFL/LED.
	- Range: Up to 100 feet line of sight between the Wireless Controller and the closest ZigBee receiver module.
	- Operating Temperature: 77° F (25° C)
	- For indoor use only.
	- Complies with FCC and Industry Canada regulations
	- Use 14 AWG or larger wires suitable for at least 80° C
	- Specifications subject to change without notice due to continuing product improvement

Operation
~~~~~~~~~~~~~~~~~
	- The connected light can be turned ON/OFF and adjust dim levels in two ways:
		#. Manually from the front panel of the In-wall Smart Dimmer
		#. Remotely with a ZigBee Controller
	- The Front Panel Rocker Dimmer allows the user to:
	- Turn ON/OFF the connected fixture.
	- To turn the connected fixture ON: Press and release the top of the rocker.
	- To turn the connected fixture OFF: Press and release the bottom of the rocker.
	- Adjust dim level
	- To increase brightness: press and hold the top of the rocker
	- To decrease brightness: press and hold the bottom of the rocker.
	

Inclusion/Exclusion to/from a network
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller into inclusion/exclusion mode
	#. Lift the air-gap switch at the bottom of the rocker to OFF position to power down the device.
	#. Hold down the UP button
	#. Push In the air-gap switch to ON position to power up the device.
	#. Release UP button within 4 seconds after power up
	--> Device will be reset (exclude from zigbee network) and auto find open zigbee network to join

Link in Amazon
~~~~~~~~~~~~~~~~
	https://www.amazon.com/GE-Compatible-Monitoring-Certification-45857GE/dp/B015YJAHY0/ref=sr_1_fkmr0_1?s=hi&ie=UTF8&qid=1502433489&sr=1-1-fkmr0&keywords=zigbee+ge+45857

Configuration description
~~~~~~~~~~~~~~~~~~~~~~~~~~
	There is no configuration in this device.