GE Plugin Smart Dimmer 14280
--------------------------------
GE Z-Wave Plus Wireless Smart Lighting Control Lamp Module, Dimmer, Plug-In, 2 Simultaneously Controlled Outlets, Works with Amazon Alexa, 14280
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	.. image:: ../../images/dimmable_module_switch/ge_plugin_dimmer_14280.jpg
	.. :align: left


Specification
~~~~~~~~~~~~~~~~~~~~~~
	- Power 120VAC, 60Hz
	- Signal (Frequency) 908.4 / 916 MHz
	- Total maximum load for both Z-Wave controlled outlet: 2.5A; 300W Incandescent or 100W Dimmable CFL/LED Z-Wave controlled outlet is fused @ 5A. This fuse is not user serviceable.
	- Range: Up to 150 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
	- Operating Temperature Range: 32–104° F (0–40° C)
	- Indoor use only

Basic operation
~~~~~~~~~~~~~~~~~~~~~~
	- Manually turn the connected lamp(s) ON or OFF (press and release).
	- Adjust the brightness level of the connected lighting by pressing and holding the button. Release the button when the desired level is attained.

Inclusion/Exclusion to/from a network
~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller to Inclusion/Exclusion mode
	#. Press and release program button once to reset device. Device will be included/excluded to/from zwave network.
	
Factory reset
~~~~~~~~~~~~~~~~
	- If plugged in, unplug the smart dimmer from the receptacle.
	- Press and hold the top button for at least 3 seconds while you plug the smart dimmer into a receptacle.
	
Link in Amazon
~~~~~~~~~~~~~~~~
	https://www.amazon.com/GE-Wireless-Simultaneously-Controlled-14280/dp/B01MTBCRSN/
	
Configuration description
~~~~~~~~~~~~~~~~~~~~~~~~~~
	N/A