GE Z-Wave 12730 In-Wall Fan Speed Control Switch
--------------------------------

	.. image:: ../../images/fan_control/item54_ge_fan_control_12730_2.jpg
	.. :align: left

Product Description
~~~~~~~~~~~~~~~~~~~~~~~~~~	
	#. Includes white and light almond paddles that will match most standard wall plates (wall plate not included)
	#. Easily locate the switch in a dark room with the integrated blue LED indicator
	#. Provides ultimate flexibility: use by itself or with up to four GE add-on switches in three, four, five and six-way wiring configurations
	#. Screw terminal installation provides improved space efficiency when replacing existing switches compared to flying leads
	#. GE Add-On Switch is required for multi-switch applications	

Working with PhD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Control GE Fan Speed Controller and other connected devices with the Zinno app available on iOS&Android
	#. With PhD, you can automate the GE Fan Speed Controller easily in many scenarios, such as turn the fan on of off when the door opened, or when the temperature rises the specific level, and much more
	#. Also, you can automate the GE Fan Speed Controller with PhD Scene routes, like Good Morning, Goodnight...	
	#. Control GE Fan Speed Controller with voice commands using PhD and the Google Assistant or Amazon Alexa

Add GE Fan Speed Controller to PhD's network
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. On Zinno App, go to Menu → Devices → Tap "+" button to put PhD to inclusion mode
	#. Press and release the top or bottom of the smart fan control switch (rocker) to include it in the network

	.. image:: ../../images/fan_control/item54_ge_fan_control_12730_2_detail.jpg
	.. :align: left

Specification
~~~~~~~~~~~~~~~~~~~~~~	
	- Model number: 				12730
	- Power source: 				Wall-Powered, 120VAC
	- Protocol: 					Z-Wave
	- Dimension:					1.8 x 2.2 x 4.2 inches
	- Weight:						1 pound
	- Color: 						White and Light almond paddles 
	
.. Operation
.. ~~~~~~~~~~~~~~~~~~~
	- The connected fan can then be turned ON/OFF and adjust speed levels in two ways:
		#. Manually from the front panel rocker of the In-wall Fan Control
		#. Remotely with a Z-Wave controller
	- To turn the connected fan ON: Press and release the top of the rocker. (Note: Fan will return to last speed setting of Fan Control. Default setting – HIGH.)
	- To turn the fan OFF: Press and release the bottom of the rocker.
	- To decrease fan speed: Press and hold lower rocker.
	- To increase fan speed: Press and hold upper rocker.
	- The LED indicator confirms fan speed settings by flashing patterns
		+ LOW – LED will blink every 2 seconds for 10 seconds
		+ MEDIUM – LED will blink every second for 10 seconds
		+ HIGH – LED will blink every half second for 10 seconds

.. Features
.. ~~~~~~~~~~~~~~~~~
	- Turn ON/OFF and control speed level of the connected Ceiling fan manually or via Z-Wave remote control (On/Off, High, Medium, Low)
	- May be used in single pole installation or with up to four GE model 12723 Add-on switches in 3, 4, 5 or 6-way wiring configurations
	- Can be Included in multiple Groups and Scenes
	- Supports Advanced Configuration; LED status, Invert switch (if unit is installed upside down)
	- Screw Terminal installation; requires wiring connections for Line (Hot), Load, Neutral and Ground. Traveler wire required for multi pole installation
	- Use a standard size wall plate for single gang installations (wall plate not included)
	- Interchangeable Paddle switch: White & light almond paddle included in package
	- LED can be enabled/disabled manually
	- Inline traveler circuit protection

.. Specification
.. ~~~~~~~~~~~~~~~~~~~~~~
	- Power: 120 VAC, 60 Hz
	- Signal (Frequency): 908.42 MHz.
	- Fan Motor Load: 1.5A
	- Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
	- Operating Temperature Range: 32-104° F (0-40° C)
	- For indoor use only

.. Inclusion/Exclusion to/from a network
.. ~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller to Inclusion/Exclusion mode
	#. Push top or bottom paddle once to reset device. Device will be included/excluded to/from zwave network.
	
.. Link in Amazon
.. ~~~~~~~~~~~~~~~~
	https://www.amazon.com/Previous-Model-Wireless-Control-Wall/dp/B00PYMGVVQ

.. Configuration description
.. ~~~~~~~~~~~~~~~~~~~~~~~~~~
	N/A