NuTone Z-Wave Plus NGD00Z Garage Controller
--------------------------------

	.. image:: ../../images/garage_controller/nutone_garage_controller.jpg
	.. :align: left

Product Description
~~~~~~~~~~~~~~~~~~~~~~~~~~	
	#. Wirelessly control and monitor your garage door from anywhere with the safest, most secure Z-Wave NuTone Smart Garage Door Controller -- Patent Pending
	#. Assured safe operation with audible and visual notification prior to Open/Close of the garage door
	#. Works with virtually all sectional automatic garage door openers manufactured after 1993
	#. Installs in less than 30 minutes
	#. Up to 100 feet between wireless gateway and/or the closest Z-Wave device
	
Working with PhD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Control NuTone Garage Controller and other connected devices with the Zinno app available on iOS&Android
..	#. Receive alerts from PhD if the NuTone Garage Controller detects that your garage door has been left open for too long, or opened unexpectedly
	#. With PhD, you could automatically set the garage open when you arrive home or close when you leave
	#. Associate NuTone Garage Controller with other smart devices in Zinno App, and set them to turn on or off when you open or close your garage door

Add NuTone Garage Controller to PhD's network
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. On Zinno App, go to Menu → Devices → Tap "+" button to put PhD to inclusion mode
	#. Press and release the link button on the NGD00Z. Device will be included/excluded to zwave network.
	
	.. image:: ../../images/garage_controller/nutone_garage_controller_d.jpg
	.. :align: left

Specification
~~~~~~~~~~~~~~~~~~~~~~
	- Model number: 				NGD00Z
	- Power source: 				Wall-Powered, 120VAC
	- Protocol: 					Z-Wave Plus
	- Dimension:					1.75 x 7.5 x 5.25 inches
	- Weight:						2 pounds
	- Color: 						Black
	
.. Operation
.. ~~~~~~~~~~~~~~~~~~~~~~~
	- NGD00Z connects to the garage door opener’s pushbutton wall console terminals.
	- A wireless tilt sensor mounts on the garage door and reports the door’s position to the NGD00Z.
	- NGD00Z responds to Z-Wave commands from Z-Wave controllers to open or close the garage door.
	- A warning indicator light flashes and a beeper sounds for 5 seconds before the door begins to move.
	- If the door does not completely open or close, a second open or close command can be sent after 30 seconds.
	- If the door does not completely open or close after the second attempt, the NGD00Z operation is suspended until a local garage door pushbutton is activated.

.. Specification
.. ~~~~~~~~~~~~~~~~~~~~~~
	NGD00Z:
	- Power supply: in -120VAC, 0.8A, out - 12VDC, 2A
	- Operating temp: 4 ~ 122 oF
	- Audible alarm: 45db, 10 feet
	- Strobe: 360 lumens
	- Z-wave: 908.4 MHz
	
	Tilt:
	- Battery: CR2032 coin cell
	- Battery life: 24 months
	- Range: 10 feet line-of-sign to NGD00Z

.. Inclusion/Exclusion to/from a network
.. ~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller to Inclusion/Exclusion mode
	#. Press link button once to reset. Device will be included/excluded to zwave network.
	
	.. image:: ../../images/garage_controller/nutone_garage_controller_d.jpg
	.. :align: left

.. Link in Amazon
.. ~~~~~~~~~~~~~~~~
	https://www.amazon.com/NuTone-NGD00Z-Z-Wave-Enabled-Controller/dp/B00WXLQY5Y

.. Configuration description
.. ~~~~~~~~~~~~~~~~~~~~~~~~~~
	There is no configuration for this device.