Xenon Z-Wave Sm-a722 IR Extender for Air Conditioner
-----------------------------------------

	.. image:: ../../images/infrared/xenon_ir_for_ac_zxt120.jpg
	.. :align: left

Product Description
~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Built-in AC IR code library with Configuration Learning capability 
	#. Able to feedback room temperature
	#. Build-in 5 direction IR emitters(hemispherical coverage) 
	#. Transmit IR control code with a wide range of carrier frequency (15 to 455kHz)
	#. Programmable power level (LOW or HIGH) for external IR emitter to avoid saturation of IR receivers

Working with PhD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Control Xenon IR Extender and other connected devices with the Zinno app available on iOS&Android
	#. Associate Xenon IR Extender and with other smart devices in Zinno App, and set it on or off when there is any event like the door open or turn on the light
	#. Automate the Xenon IR Extender with PhD Scence routes, like Good Morning, Goodnight...
	#. Control Xenon IR Extender with voice commands using PhD and the Google Assistant or Amazon Alexa	
	
Add Remotec Z-Wave IR Extender to PhD's network
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. On Zinno App, go to Menu → Devices → Tap "+" button to put PhD to inclusion mode
	#. Press "PROG" button once. Device will be included/excluded to/from zwave network.
	
	.. image:: ../../images/infrared/item96_xenon_ir_for_ac_zxt120_detail.jpg
	.. :align: left

Specification
~~~~~~~~~~~~~~~~~~~~~~
	- Model number: 				Sm-a722
	- Power Source: 				USB mini-B, 5V DC Jack, or Battery
	- Battery Type:					x3 AAA
	- Protocol: 					Z-Wave
	- Dimension:					2.76 (diameter) x 0.7 (thickness) inches
	- Weight:						0.1 pounds
	- Color: 						White
	
.. Operation
.. ~~~~~~~~~~~~~~~~~
	- Plug-in 5Vdc power into the USB socket if operated at Always Listening mode
	- Install 3xAAA batteries if operated at FLiRS mode
	- To switch from FLiRS mode to Always listening mode, below steps are required:
		(1) Press and hold the PROG button on the ZXT-120 for around 5 seconds. LED turns ON after PROG key hold for 5seconds
		(2) Release the button and then press the PROG button 3 times within 2 seconds. LED flashes four times then stay off
	- To switch from Always listening mode to FLiRS mode, below steps are required:
		(1) Press and hold the PROG button on the ZXT-120 for around 5 seconds. LED turns ON after PROG key hold for 5seconds
		(2) Release the button and then press the PROG button 3 times within 2 seconds. LED flashes twice then stay off 

.. Specification
.. ~~~~~~~~~~~~~~~~~~~~~~
	- RF operating range: up to 80 feet line of sign
	- IR operating range: up to 25 feet line of sign
	- Measure temperature range: 32 ~ 104 oF (0 ~ 40 oC)
	- Operating temperature range: 32 ~ 104 oF (0 ~ 40 oC)
	- Usb power: 5V DC - 100mA
	- Battery: 3x1.5V AAA

.. Inclusion/Exclusion to/from a network
.. ~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller to Inclusion/Exclusion mode
	#. Press "PROG" button once. Device will be included/excluded to/from zwave network.
	
	.. image:: ../../images/infrared/item96_xenon_ir_for_ac_zxt120_detail.jpg
	.. :align: left



	
.. Link in Amazon
.. ~~~~~~~~~~~~~~~
	https://www.amazon.com/Remotec-Z-Wave-ZXT-120-Extender-Conditioners/dp/B00Q6SXTPS
	
.. Configuration description
.. ~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Location for IR code learning and start learning
		- Parameter: 25 (0x19)
		- Size: 1 byte
		- Value: 0x00 ~ 0x16
		- Default: N/A
	
	#. Learning status
		- Parameter: 26 (0x1A)
		- Size: 1 byte
		- Value: 
			+ 0x00: idle, target channel is idle
			+ 0x01: OK, the latest learning process successful and completed
			+ 0x02: learning, ZXT-120 is busy
			+ 0x04: failed, the latest learning request failed
		- Default: 0x00
	
	#. IR code number for built-in code lib
		- Parameter: 27 (0x1B)
		- Size: 1 byte
		- Value: 
			Refer to "Code list" for setting value
		- Default: N/A
	
	#. External IR emitter power level
		- Parameter: 28 (0x1C)
		- Size: 1 byte
		- Value: 
			+ 0x00: normal power mode
			+ 0xFF: high power mode
		- Default: 0xFF
	
	#. Surround IR control
		- Parameter: 32 (0x20)
		- Size: 1 byte
		- Value: 
			+ 0x00: disable surround IR emitters
			+ 0xFF: enable surround IR emitters
		- Default: 0xFF
	
	#. AC function swing control
		- Parameter: 33 (0x21)
		- Size: 1 byte
		- Value: 
			+ 0x00: swing OFF
			+ 0xFF: swing auto
		- Default: 0xFF
	
	#. Sensor temperature compensation
		- Parameter: 37 (0x25)
		- Size: 1 byte
		- Value: 
			+ 0x00 ~ 0x7F: compensation temperature from 0 ~ 127 oC
			+ 0x80 ~ 0xFF: compensation temperature from -127 ~ -1 oC
		- Default: 0x00