Aeotec Z-Wave Plus ZW074-A MultiSensor Gen5 -------------------------------- .. image:: ../../images/motion_sensor/aeon_gen5_motion.jpg .. :align: left Product Description ~~~~~~~~~~~~~~~~~~~~~~~~~~ #. 4-in-1 Indoor/Outdoor Z-Wave Multisensor. #. Detects motion, light sensitivity, temperature and humidity. #. Sends signals to as many as 6 associated Z-Wave devices. Working with PhD ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #. Monitor Aeotec Multisensor Gen5 and other connected devices with the Zinno app available on iOS&Android #. Receive alerts from PhD if the Aeotec Multisensor Gen5 detects movement #. Associate Aeotec Multisensor Gen5 with other smart devices in Zinno App, and set them to turn on or off when sensor detects movement Add Aeotec Multisensor Gen5 to PhD's network ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #. On the Zinno app, press Left Menu Bar, then select “Devices” #. Select “+” button to put the PhD in inclusion mode, keep the sensor close to PhD within 10 feet (3 meters) #. Press the Action Button on Aeotec Multisensor Gen5 #. If detecting a new device successfully, PhD will announce “Found Device”, and Zinno app will display the dialog box, asking user to interact with device one more time #. Repeat step #3, PhD will announce “The device is being added” #. If adding the sensor successfully, PhD will announce “Adding Aeotec Multisensor Gen5 success” and on Zinno app will display the dialog boxes that indicate user has added device successfully .. image:: ../../images/motion_sensor/aeon_gen5_motion_b.jpg .. :align: center Specification ~~~~~~~~~~~~~~~~~~~~~~ - Model number: ZW074-A - Power source: USB DC 5V, Battery - Battery type: x2 CR123A batteries - Protocol: Z-Wave Plus .. - Dimension: 1.8 x 2.5 x 1.8 inches .. - Weight: 0.13 pounds - Color: White .. Specification .. ~~~~~~~~~~~~~~~~~~~~~~~~~ - Power Supply: USB DC 5V or battery power(4×AAA batteries) - Operating Temperature: -10 oC to 60 oC . - Measured Temperature Range: -10 C to 50 C . Accuracy: ±1 oC . - Humidity Range: 20% to 80%. Accuracy: ±5% (at 25 oC ). - Lighting: 0 LUX to 1000 LUX. - Motion Sensitivity: 3 meters to 5 meters. - Water Proofing: IP42 - Wireless Range: Up to 600feet/150 metres outdoors. .. Inclusion/Exclusion to/from a network .. ~~~~~~~~~~~~~~~~~~~~~~~ #. Put controller to Inclusion/Exclusion mode #. Press program button once. Device will be included/excluded to/from zwave network. .. image:: ../../images/motion_sensor/aeon_gen5_motion_b.jpg .. :align: center .. Wake up information .. ~~~~~~~~~~~~~~~~~~~~~~~~~ - When battery is used, to wake up device, press and hold its Z-Wave Button for 3 seconds and then release it. Your MultiSensor’s LED should now be solid to indicate that it is active. - When completing configurating or communicating with device, to put device into sleep mode for battery saving, press and hold its Z-Wave Button for 3 seconds and then release it. - When power-supply is used, device is in waken up state always. .. Factory reset .. ~~~~~~~~~~~~~~~~~ Press and hold z-wave button for 20 seconds and then release. LED will stay in solid for 2 seconds and then turn off indicates reset successfully. .. Button pressed actions and events .. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ==================================== =============================================================================== Short 1 time pressed Add device to z-wave network Remove device from z-wave network Press and hold 3 seconds Send Wake Up Notification (when it is in battery power) Press and hold 20 seconds Reset device to factory setting ==================================== =============================================================================== .. Link in Amazon .. ~~~~~~~~~~~~~~~~~~~~~~~ https://www.amazon.com/Aeotec-Multi-Sensor-ZW074-C-Z-Wave-Plus/dp/B01HR4NCYW .. Configuration description .. ~~~~~~~~~~~~~~~~~~~~~~~~~~ #. Enable wake-up device 10 minutes after re-power on (battery mode) - Parameter: 2 (0x02) - Size: 1 byte - Value: 0x00: disable others: enable - Default: 0x00 #. Auto clear motion interval - Parameter: 3 (0x03) - Size: 2 bytes - Value: 1 ~ 15300 + 1 ~ 255: unit is second + 256 ~ 15300: unit is minute with below formular a. interval = value/60 (without remainder) b. interval = value/60 + 1 (if remainder) - Default: 0x00F0 #. Enable motion sensor - Parameter: 4 (0x04) - Size: 1 byte - Value: + 0x00: disable + 0x01: enable - Default: 1 #. Trigger commands for motion sensor - Parameter: 5 (0x05) - Size: 1 byte - Value: + 0x01: basic set CC (for associated devices) + 0x02: sensor binary report CC (for controller) - Default: 1 #. Enable report when measurements reach certain threshold or percentage - Parameter: 40 (0x28) - Size: 1 byte - Value: + 0x00: diable + 0x01: enable - Default: 0 #. Temperature change threshold - Parameter: 41 (0x29) - Size: 2 bytes - Value: a. when unit is Celcius, threshold = set value b. when unit is Farenheit, threshold = set value * 1.8 c. High byte is part of integer, low byte is the fractional part - Default: 0x0100 #. Huminity change - Parameter: 42 (0x2A) - Size: 2 bytes - Value: + Unit is percentage + High byte is part of integer, low byte is the fractional part - Default: 0x0500 #. Luminance change - Parameter: 43 (0x2B) - Size: 2 bytes - Value: + Unit is LUX + High byte is part of integer, low byte is the fractional part - Default: 0x6400 (100 LUX) #. Battery change - Parameter: 44 (0x2C) - Size: 2 bytes - Value: + Unit is percentage + High byte is part of integer, low byte is the fractional part - Default: 0x0500 (100 LUX) #. Low temperature report When this feature is enabled, sensor will report 0xFFFF to controller in case current temperature is lower than -15oC - Parameter: 46 (0x2E) - Size: 1 byte - Value: + 0x00: disable this feature + 0x01: enable this feature - Default: 0x00 #. Report items to group 1 - Parameter: 101 (0x65) - Size: 4 bytes - Value: 0x05~0x28DE80 + bit 0: battery + bit 5: temperature + bit 6: Humidity + bit 7: luminance - Default: 0x000000E1 (all above items are selected) #. Auto report interval to group 1 - Parameter: 111 (0x6F) - Size: 1 byte - Value: + Unit is second + Valid value: 0x05~0x28DE80 - Default: 0x00000708