Fibaro Z-Wave FGMS-001 Motion Sensor
--------------------------------

	.. image:: ../../images/motion_sensor/fibaro_home_motion.jpg
	.. :align: left

Product Description
~~~~~~~~~~~~~~~~~~~~~~~~~~	
	#. World’s smallest z-wave Multi-sensor detects motion, temperature, light and vibrations due to built-in accelerometer. Only 1 ¾” in diameter
	#. Intelligent Object recognition- Can distinguish between a small pets or person. Adjustable sensitivity and indicator LED to persons liking
	#. Multi Color LED eye visually display’s motion and temperature per user configuration settings
	#. Built-in tamper protection alerts user if sensor has been moved and can even be used for Earthquake detection
	
Working with PhD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Monitor your Fibaro Motion Sensor and other connected devices with the Zinno app available on iOS&Android
	#. Receive alerts from PhD if the Fibaro Motion Sensor detects movement
	#. Associate Fibaro Motion Sensor with other smart devices in Zinno App, and set them to turn on or off when sensor detects movement, or a change in temperature, light, or humidity
	
Add Fibaro Motion Sensor to PhD's network
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. On Zinno App, go to Menu → Devices → Tap "+" button to put PhD to inclusion mode
	#. Press program button 3 times quickly. Device will be included/excluded to/from zwave network.
	
	.. image:: ../../images/motion_sensor/item59_fibaro_home_motion_b.jpg
	.. :align: left

Specification
~~~~~~~~~~~~~~~~~~~~~~
	- Model number: 				FGMS-001
	- Power source: 				Battery
	- Battery type:					CR123A
	- Protocol: 					Z-Wave
	- Dimension:					1.7 x 1.7 x 1.7 inches
	- Weight:						0.16 pounds
	- Color: 						White

.. Specification
.. ~~~~~~~~~~~~~~~~~~~~~~~~~
	- Operating frequency: 869/908/921 MHz
	- Operating range: up to 50m outdoor and 30m indoor
	- Operating temperature: 0-40 oC
	- Measure temperature range: -20 ~ 100 oC
	- Measure light range: 0 ~ 32000 LUX
	- Detection angle: 45 degrees
	- Battery: 3.6 VDC CR123A

.. Inclusion/Exclusion to/from a network
.. ~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller to Inclusion/Exclusion mode
	#. Press program button 3 times quickly. Device will be included/excluded to/from zwave network.
	
	.. image:: ../../images/motion_sensor/fibaro_home_motion_b.jpg
	.. :align: left
	
.. Link in Amazon
.. ~~~~~~~~~~~~~~~~~
	https://www.amazon.com/Fibaro-Z-Wave-Motion-Sensor-FGMS-001/dp/B01615SUBI
	
.. Configuration description
.. ~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Motion sensor's sensity
		- Parameter: 1 (0x01)
		- Size: 1 byte
		- Value: 0x08 ~ 0xFF
		- Default: 0x01

	#. Motion sensor blind time
		- Parameter: 2 (0x02)
		- Size: 1 byte
		- Value: 
			+ valid value: 0x00 ~ 0x0F
			+ fomular: time = 0.5 * (value+1)
		- Default: 0x0F
	
	#. PIR sensor "PULL COUNTER"
		- Parameter: 3 (0x03)
		- Size: 1 byte
		- Value: 
			+ valid value: 0x00 ~ 0x03
			+ fomular: pules = value + 1
		- Default: 0x01

	#. PIR sensor's "WINDOW TIME"
		- Parameter: 4 (0x04)
		- Size: 1 byte
		- Value: 
			+ valid value: 0x00 ~ 0x03
			+ fomular: times = 4 * (setting value + 1)
		- Default: 0x02
			
	#. Motion alarm cancellation delay
		- Parameter: 6 (0x06)
		- Size: 2 bytes
		- Value: 
			+ valid value: 1 ~ 65535
		- Default: 0x001E
	
	#. PIR sensor operating mode
		- Parameter: 8 (0x08)
		- Size: 1 byte
		- Value: 
			+ 0x00: PIR always active
			+ 0x01: PIR active during day only
			+ 0x02: PIR active during night only
		- Default: 0x00

	#. Night or Day.
		- Parameter: 9 (0x08)
		- Size: 2 bytes
		- Value: 
			+ Valid value: 1 ~ 65535
			+ Unit is LUX
		- Default: 0x00C8
	
	#. Trigger to associated devices
		- Parameter: 12 (0x0C)
		- Size: 1 byte
		- Value: 
			+ 0x00: Basic ON and basic OFF are sent
			+ 0x01: Only basic ON is sent
			+ 0x02: Only basic OFF is sent
		- Default: 0x00
	
	#. Trigger ON command format
		- Parameter: 14 (0x0E)
		- Size: 1 byte
		- Value: 
			+ 0: Turn off associated devices
			+ 1 ~ 99: Turn on associated devices (Binary devices), Turn on associated devices with dimmer value
			+ 255: Turn on associated devices (Binary devices), Turn on associated devices with last memorized dimmer value
		- Default: 0x00
	
	#. Trigger OFF command format
		- Parameter: 16 (0x10)
		- Size: 1 byte
		- Value: 
			+ 0: Turn off associated devices
			+ 1 ~ 99: Turn on associated devices (Binary devices), Turn on associated devices with dimmer value
			+ 255: Turn on associated devices (Binary devices), Turn on associated devices with last memorized dimmer value
		- Default: 0x00

	#. Tamper sensity
		- Parameter: 20 (0x14)
		- Size: 1 byte
		- Value: 
			+ Valid value: 0 ~ 122
			+ Formula: setting val * 0,016g, 
			+ Zero means disable this feature.
		- Default: 0x0F (0,224g)
	
	#. Tamper alarm cancellation delay
		- Parameter: 22 (0x16)
		- Size: 2 bytes
		- Value: 
			+ Valid value: 1 ~ 65535 
			+ Unit is second
		- Default: 0x1E
			
	#. Tamper alarm broadcast mode
		- Parameter: 26 (0x1A)
		- Size: 1 byte
		- Value: 
			+ 0: Disable broadcast mode
			+ 1: Enable broadcast mode
		- Default: 0x00

	#. Illumination report threshold
		- Parameter: 40 (0x28)
		- Size: 2 bytes
		- Value: 
			+ 0x0000: disable this feature
			+ Valid value: 0x01 ~ 0xFFFF
			+ Unit is LUX
		- Default: 0x00C8

	#. Illumination report interval
		- Parameter: 42 (0x2A)
		- Size: 2 bytes
		- Value: 
			+ 0x0000: disable this feature
			+ Valid value: 0x01 ~ 0xFFFF
			+ Unit is second
		- Default: 0x0000

	#. Temperature change report threshold
		- Parameter: 60 (0x3C)
		- Size: 1 byte
		- Value: 
			+ 0x00: disable this feature
			+ Valid value: 0x01 ~ 0xFF
			+ Unit is celsius
			+ Setting number contains 1 decimal point. Setting value approximately 0.1 ~ 25.5 oC
		- Default: 0x000A
			
	#. Temperature measuring interval
		- Parameter: 62 (0x3E)
		- Size: 2 bytes
		- Value: 
			+ 0x00: Temperature is not measured
			+ Valid value: 0x0001 ~ 0xFFFF
			+ Unit is celsius
			+ Setting number contains 1 decimal point. Setting value approximately 0.1 ~ 25.5 oC
		- Default: 0x0384
		
	#. Temperature report interval
		- Parameter: 64 (0x40)
		- Size: 2 bytes
		- Value: 
			+ 0x00: report is not sent
			+ Valid value: 0x0001 ~ 0xFFFF
			+ Unit is second
		- Default: 0x0000
			
	#. Temperature offset
		- Parameter: 66 (0x42)
		- Size: 2 bytes
		- Value: 
			+ 0x0000 ~ 0x0064: appropriated to 0oC to 100oC
			+ 0x0000 ~ 0xFFFF: appropriated to 0oC to 100oC
			+ Valid value: 0x0001 ~ 0xFFFF
			+ Unit is second
		- Default: 0x0000
		
	#. LED indicator setting
		- Parameter: 80 (0x50)
		- Size: 1 byte
		- Value: 
			+ 0: LED inactive.
			+ 1: LED colour depends on the temperature. Set by #86 and #87.
			+ 2: Flashlight mode - LED glows in white for 10 seconds.
			+ 3: White.
			+ 4: Red.
			+ 5: Green.
			+ 6: Blue.
			+ 7: Yellow.
			+ 8: Cyan.
			+ 9: Magenta.
			+ 10: LED colour depends on the temperature. Set by parameters #86 and #87.
			+ 11: Flashlight mode - LED glows in white through 10 seconds. Each next detected motion extends the glowing by next 10 seconds.
			+ 12: White.
			+ 13: Red.
			+ 14: Green.
			+ 15: Blue.
			+ 16: Yellow.
			+ 17: Cyan
			+ 18: Magenta
			+ 19: LED colour depends on the temperature. Set by parameters #86 and #87.
			+ 20: White
			+ 21: Red
			+ 22: Green
			+ 23: Blue
			+ 24: Yellow
			+ 25: Cyan
			+ 26: Magenta
			
			+ Values from 1 to 9 = single long blink at the moment of reporting motion. No other motion will be indicated until alarm is cancelled.
			+ Values from 10 to 18 = single long blink at the moment of reporting motion and one short blink each time the motion is detected again.
			+ Values from 19 to 26 = single long blink at the moment of reporting motion and two short blinks each time the motion is detected again.
		- Default: 0x0A
		
	#. LED brightness
		- Parameter: 81 (0x51)
		- Size: 1 byte
		- Value: 
			+ 0x00: brightness detemined by parameter #82,#83
			+ 0x01 ~ 0x63: percentage
		- Default: 0x32

	#. Ambient illumination level below  which LED brightness is set to 1% (#82)
		- Parameter: 82 (0x52)
		- Size: 2 bytes
		- Value: 
			+ Valid value: 0x00 ~ value setting #83
		- Default: 0x64
	
	#. Ambient illumination level below  which LED brightness is set to 100% (#83)
		- Parameter: 83 (0x53)
		- Size: 2 bytes
		- Value: 
			+ Valid value: value in #82 setting ~ 0xFFFF
		- Default: 0x03E8
	
	#. Minimum temperature resulting in BLUE led illumination (#86)
		- Parameter: 86 (0x56)
		- Size: 1 byte
		- Value: 
			+ Valid value: 0 ~ value in #87
		- Default: 0x12
		
	#. Maximum temperature resulting in RED led illumination (#87)
		- Parameter: 87 (0x57)
		- Size: 1 byte
		- Value: 
			+ Valid value: value in #86 ~ 0xFF
		- Default: 0x1C

	#. LED indicating tamper alarm
		- Parameter: 89 (0x59)
		- Size: 1 byte
		- Value: 
			+ 0x00 - LED does not indicate tamper alarm.
			+ 0x01 - LED indicates tamper alarm
		- Default: 0x01