Jasco in-wall switch
--------------------------------
GE Z-Wave Wireless Smart Lighting Control Smart Switch, On/Off, In-Wall, Includes White & Light Almond Paddles, Works with Amazon Alexa, 12722
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


	.. image:: ../../images/onoff_inwall_switch/jasco_inwall_switch_12722.jpg
	.. :align: left

Operation
~~~~~~~~~~~~~~~~~
	- Turn ON/OFF manually or remotely via the Z-Wave controller
	- Can be Included in multiple Groups and Scenes
	- May be used in single pole installation or with up to two GE Add-on switches in 3-way or 4-way wiring configurations
	- Compatible with all incandescent and CFL/LED bulbs
	- Interchangeable Paddle switch — White & light almond paddle in package
	- Uses a standard, decorative-size wall plate for single gang installations (wall plate not included)
	- Blue LED indicates switch location in a dark room
	- Z-Wave Certified for simple pairing and integrated home automation
	- Screw Terminal Installation — requires wiring connections for Line (Hot), Load, Neutral, and Ground. Traveler wire required for 3-way or 4-way installation

Specification
~~~~~~~~~~~~~~~~~~~~~~
	- Power: 120 VAC, 60 Hz.
	- Signal (Frequency): 908.42 MHz.
	- Maximum Loads: 960W, incandescent, 1⁄2 HP Motor or 1800W (15A) Resistive	
	- Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
	- Operating Temperature Range: 32-104° F (0-40° C)
	- For indoor use only.

Inclusion/Exclusion to/from a network
~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller to Inclusion/Exclusion mode
	#. Push bottom paddle once. Device will be included/excluded to/from zwave network.
	
Link in Amazon
~~~~~~~~~~~~~~~~~~~~~~
	https://www.amazon.com/GE-Wireless-Lighting-Control-12722/dp/B0035YRCR2
	
Configuration description
~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. LED light specify
		- Parameter: 3 (0x03)
		- Size: 1 byte
		- Value:
			(1) 0 = LED on when light off
			(2) 1 = LED on when light on
			(3) 2 = LED off all the time
		- Default: 0
	
	#. Invert switch
		- Parameter: 4 (0x04)
		- Size: 1 byte
		- Value:
			(1) 0 = ON at the bottom and OFF at the top
			(2) 1 = ON at the top and OFF at the bottom
		- Default: 0