RCS Z-Wave TZ45 Thermostat
--------------------------------

	.. image:: ../../images/thermostat/rcs_thermostat.jpg
	.. :align: left
	
Product Description
~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. All in One Design.
	#. Z-Wave Compatible.
	#. Standard or Heat Pump HVAC Systems.
	#. Programmable, 4 x 7 day schedule.
	#. 128x64 Backlit Graphical Display
	
Working with PhD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	
	#. Control your RCS Thermostat and other connected devices with the Zinno app available on iOS&Android
	#. With PhD, you could automatically turn RCS Thermostat on or off in many scenarios, such as door opens/closes, human appearance detected, and much more
	#. Also, you can automate the RCS Thermostat with PhD Scence routes, like Good Morning, Goodnight...	
	#. Control RCS Thermostat with voice commands using PhD and the Google Assistant or Amazon Alexa	
	
Add RCS Thermostat to PhD's network 
~~~~~~~~~~~~~~~~~~~~~~~
	#. On the Zinno app, press Left Menu Bar, then select “Devices”
	#. Select “+” button to put the PhD in inclusion mode, keep your thermostat close to PhD within 10 feet (3 meters)
	#. In the Thermostat’s Main Menu, scroll down to the ZWave Install item then press the Select button. After that, the Thermostat's sreen will display "Add Thermostat to Z-Wave network", press YES button
	#. PhD will announce “Found Device”, and Zinno app will display the dialog box, asking user to interact with device one more time
	#. Repeat step #3, PhD will announce “The device is being added”
	#. If adding the device successfully, PhD will announce “Adding RCS Thermostat success” and on Zinno app will display the dialog boxes that indicate user has added device successfully	

	.. image:: ../../images/thermostat/rcs_thermostat_menu.jpg
	.. :align: left
	
	
Specification
~~~~~~~~~~~~~~~~~~~~~~
	- Model number: 				TZ45
	- Power source: 				24VAC from HVAC System
	- Protocol: 					Z-Wave
	- Dimension:					5 x 3 x 3/4 inches
	- Weight:						0.65 pounds
	- Color: 						White
	
.. System Modes
.. ~~~~~~~~~~~~~~~
	- OFF Mode: System is off. No heating or cooling will come on. If system was on, it will turn off immediately.
	- HEATING Mode: Only heating will occur.
	- COOLING Mode: Only cooling will occur.
	- AUTO Mode: Heating or cooling will come on according to the heating and cooling setpoints. The system will automatically switch between heating and cooling modes as needed to maintain the setpoints.
	

.. Inclusion/Exclusion to/from a network
.. ~~~~~~~~~~~~~~~~~~~~~~~
	#. Put controller to Inclusion/Exclusion mode
	#. When prompted by your Z-Wave controller, Press the YES button in the ZWave Install screen.. Device will be included/excluded to/from zwave network.
	
	.. image:: ../../images/thermostat/rcs_thermostat_menu.jpg
	.. :align: left
	
.. Link in Amazon
.. ~~~~~~~~~~~~~~~~~~~~
	https://www.amazon.com/RCS-Technology-RCTZ45-Communicating-Thermostat/dp/B01LY5YXNH
	
.. Configuration description
.. ~~~~~~~~~~~~~~~~~~~~~~~~~~
	There is no configuration in this device.
	
	
.. Brief information
.. ~~~~~~~~~~~~~~~~~
	- 24VAC systems Note: requires both the 24R and 24C (common) wires
	- Standard gas/oil/electric heating systems
		+ 1 stage heating and cooling
		+ 2 stage heating and cooling
	- Heat Pump systems:
		+ 1 stage heating and cooling
		+ 2 stage heating and cooling
		+ 2 nd or 3 rd stage Auxiliary heating (heat strips)
	- Do NOT use for line voltage controls (120/240VAC)
	
	.. image:: ../../images/thermostat/rcs_thermostat_main_screen.jpg
	.. :align: left