Everspring Z-Wave ST812-2 Water/Flood Sensor
-------------------------------

	.. image:: ../../images/water_flood/everspring_flood_sensor.jpg
	.. :align: left
	
Product Description
~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. IP44 water proof
	#. Built-in 60dB beep tone
	#. Special water sensor probe design to prevent false trigger
	#. Beep sound and LED indication
	#. Reports status to the gateway every hour
	#. Low battery indication


Working with PhD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Monitor your Everspring Water/Flood Sensor and other connected devices with the Zinno app available on iOS&Android
	#. Receive alerts from PhD if the Everspring Water/Flood Sensor detects detects water
	#. Associate Everspring Water/Flood Sensor with other smart devices in Zinno App, and set them to turn on or off when sensor detects water

Add Everspring Water/Flood Sensor to PhD's network
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. On the Zinno app, press Left Menu Bar, then select “Devices”
	#. Select “+” button to put the PhD in inclusion mode, keep the sensor close to PhD within 3 feet (0.91 meter)
	#. Press program button 3 times within 1.5 seconds
	#. If detecting a new device successfully, PhD will announce “Found Device”, and Zinno app will display the dialog box, asking user to interact with device one more time
	#. Repeat step #3, PhD will announce “The device is being added”
	#. If adding the sensor successfully, PhD will announce “Adding Everspring Flood Detected Sensor success” and on Zinno app will display the dialog boxes that indicate user has added device successfully		

Specification
~~~~~~~~~~~~~~~~~~~~~~
	- Model number: 				ST812-2
	- Power source: 				Battery
	- Battery type:					x3 AA batteries
	- Protocol: 					Z-Wave
	- Dimension:					3.34 x 3.34 x 1.53 inches
	- Weight:						0.37 pounds
	- Color: 						White	
		
	.. image:: ../../images/water_flood/everspring_flood_sensor_b.png
	.. :align: left

.. Factory reset
.. ~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Press program button 3 times within 1.5 seconds
	#. Within 1 second, press and hold program button until beep tone stops
	#. LED is ON 2 seconds then OFF 2 seconds until completing process

.. Link in Amazon
.. ~~~~~~~~~~~~~~~~~~~~~~~~~
	https://www.amazon.com/Everspring-Z-Wave-Water-Flood-Sensor/dp/B006TG9W4Y

.. Configuration description
.. ~~~~~~~~~~~~~~~~~~~~~~~~~~
	#. Basic set level
		- Parameter: 1 (0x01)
		- Size: 1 byte
		- Value:
			+ 0x00: OFF
			+ 0x01 ~ 0x63: ON for ON/OFF devices and dim level for dimmable devices
		- Default: 0x63