GE In-Wall Smart Dimmer 14294

GE Z-Wave Plus Wireless Smart Lighting Control Smart Dimmer Switch, In-Wall, Includes White & Light Almond Paddles, Works with Amazon Alexa, 14294

Specification

• Power: 120 VAC, 60 Hz.
• Signal (Frequency): 908.4 / 916 MHz
• Maximum Loads: 600W, 2-gang 500W or 3-gang 400W incandescent, 150W CFL/LED
• Range: Up to 132 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
• Operating Temperature Range: 32-104° F (0-40° C)
• For indoor use only.

Operation

• The connected light can be turned ON/OFF and adjust dim levels in two ways:

  1. Manually from the front panel of the In-wall Dimmer
  2. Remotely with a Z-Wave Controller

• The Front Panel Rocker Dimmer allows the user to:

  1. Turn ON/OFF the connected fixture.
  2. To turn the connected fixture ON: Press and release the top of the rocker.
  3. To turn the connected fixture OFF: Press and release the bottom of the rocker.
  4. To increase brightness: press and hold the top of the rocker
  5. To decrease brightness: press and hold the bottom of the rocker.

Inclusion/Exclusion to/from a network

• Press top or bottom paddle once to reset device when controller is in inclusion mode

Factory reset

Quickly press ON (Top) button three (3) times then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully.

Link in Amazon

https://www.amazon.com/New-Model-Wireless-Lighting-Wall/dp/B01MUCZA1C/ref=sr_1_1?s=hi&ie=UTF8&qid=1502423637&sr=1-1&keywords=GE+In-Wall+Smart+Dimmer+14294

Configuration description

There is no configuration in this device.