GE In-Wall Smart Motion Switch 26931

GE Z-Wave Plus Wireless Smart Lighting Control Motion Switch, On/Off, In-Wall, Occupancy Vacancy Sensor, Works with Amazon Alexa, 26931

../../../_images/ge_motion_switch_26931.jpg

Operation

    1. Top Button — Press & release to turn the switch on
    1. Bottom Button — Press & release to turn the switch off
    1. Configuration Button — Changes the operation mode of switch
    1. Motion Sensor
    1. Blue LED — behind cover
    1. AirGap Switch — Pull the air gap switch out to disconnect the power. Push it all the way back in for normal operation
../../../_images/ge_motion_switch_26931_desc.jpg

Specification

  • Power: 120 VAC, 60 Hz.
  • Signal (Frequency): 908.4/916 MHz.
  • Maximum Loads: 960W, incandescent, ½ HP Motor or 1800W (15A) Resistive
  • Range: Up to 150 feet line of sight between the Wireless Controller or the closest Z-Wave receiver module.
  • Operating Temperature Range: 32-104° F (0-40° C)
  • For indoor use only.
  • Specifications subject to change without notice due to continuing product improvement

Inclusion/Exclusion to/from a network

  1. Put controller to Inclusion/Exclusion mode
  2. Push top or bottom paddle once to reset device. Device will be included/excluded to/from zwave network.

Factory reset

Press and release the top button ten times.

Configuration description

N/A