Jasco in-wall dimmable switch

GE Z-Wave Wireless Smart Lighting Control Smart Dimmer Switch, In-Wall, Includes White & Light Almond Paddles, Works with Amazon Alexa, 12724

../../../_images/jasco_inwall_dimmer_12724.jpg

Feature and benefits

  • New aesthetically pleasing design with rocker switch and slender dimmer control slide bar
  • Integrated linear full-range slide control for easy, precise operation
  • Controls a variety of dimmable LED and CFL lamps
  • Compatible with Incandescent and Halogen lamps
  • Single pole or 3-way operation (when using 3-way switch); packaged with White, Ivory, and Light Almond color change kits
  • Additional color change kits available in Black, Brown, Red and Gray
  • Slim, compact housing fits easily into a standard wallbox and is suitable for multi-gang installations with other Decora products
  • The slide bar location preserves the selected brightness level when the dimmer is switched OFF
  • Microprocessor control offers flexibility to program LEDs and CFLs for best performance
  • Switch under the color change kit to turn locator light ON/OFF
  • No fins for multi-gang installation
  • Screw terminals with back wire capability for easier installation, a Neutral wire is not required for operation
  • Built-in radio/TV interference filter

Specification

  • Power: 120 VAC, 60 Hz.
  • Incandescent: 600W
  • LED and CFL: 300W (2.5A)
  • Single pole and 3-way
  • Operating Temperature Range: 0°C to 55°C
  • Storage Temperature Range: -10°C to 85°C
  • Relative Humidity: 20% to 90% non-condensing

Inclusion/Exclusion to/from a network

  1. Put controller to Inclusion/Exclusion mode
  2. Push top or bottom paddle once to reset. Device will be included/excluded to/from zwave network.

Configuration description

  1. LED light specify
    • Parameter: 3 (0x03)
    • Size: 1 byte
    • Value:
      1. 0 = LED on when light off
      2. 1 = LED on when light on
      3. 2 = LED off all the time
    • Default: 0
  2. Invert switch
    • Parameter: 4 (0x04)
    • Size: 1 byte
    • Value:
      1. 0 = ON at the bottom and OFF at the top
      2. 1 = ON at the top and OFF at the bottom
    • Default: 0
  3. Number of dim steps when receiving zwave command
    • Parameter: 7 (0x07)
    • Size: 1 byte
    • Value:
      1 ~ 99: number of steps
    • Default: 1
  4. Timming of dim steps when receiving zwave command
    • Parameter: 8 (0x08)
    • Size: 2 byte
    • Value:
      1 ~ 255: number of steps
    • Default: 3
  5. Number of dim steps when manual control
    • Parameter: 9 (0x09)
    • Size: 1 byte
    • Value:
      1 ~ 99: number of steps
    • Default: 1
  6. Timming of dim steps when manual control
    • Parameter: 10 (0x0A)
    • Size: 2 byte
    • Value:
      1 ~ 255: number of steps
    • Default: 3
  7. Number of dim steps when all-on/all-off command
    • Parameter: 11 (0x0B)
    • Size: 1 byte
    • Value:
      1 ~ 99: number of steps
    • Default: 1
  8. Timming of dim steps when all-on/all-off command
    • Parameter: 12 (0x0C)
    • Size: 2 byte
    • Value:
      1 ~ 255: number of steps
    • Default: 3